PACHEM-BioCFI-20

Cold Flow Improver for RME and FAME

General information:

Pachem-BioCFI-20 is a Cold Flow Improver used to enhance low-temperature properties of RME and FAME fuels. It is a polymer composition in higher boiling hydrocarbons. It is specially designed to reduce both CFPP and Pour Point of the RME/FAME fuels. Depending on the composition of RME/FAME, it can reduce CFPP much below -20oC even down to -30oC.

Typical Physical And Chemical Properties:

ParameterUnitValueTest method
Colour, at 20 0C  - Amber PB-01 - edition 1
Density at 15 0C  kg/m3  900-960 PN-EN ISO 12185:2002
Pour Point  0C  < 0 PN-ISO 3016:2005
Flash point  0C  > 55 PN-EN ISO 2719:2007
Viscosity at 40 0C mm2/s   < 100 PN-EN ISO 3104:2004
Biocide active ingredient content % m/m < 0,5 PB-02 - Edition 1

Application:

Pachem-BioCFI-20 can be dosed undiluted into RME/FAME blends down to temperatures of 30°C depending on the characteristic of RME into which is dosed. The RME mixture should be at least 10°C above its cloud point at the time of additive injection. Pre-dilution of the product in RME/FAME (e.g. 50%) before dosing to the main stream (or batch) of RME/FAME is acceptable; it requires recalculation (adjustment) of the treat rate. A temperature of 40-50°C is recommended for storing the product. The product temperature should not exceed 70°C. Normally it is recommended to heat the product only directly before use. However, storage at elevated temperature over a period of 3-3 months is acceptable. After storage at low temperatures the product should be homogenized before use; separation of phases in the product at low temperatures is an expected and acceptable process.

Treat Rate:

Typical dosage of Pachem-Bio-CFI-20 is 1800 - 2000 ppm weight. The concentration of Pachem-Bio-CFI-20 depends on the base fuel quality and type (chemical composition) of biodiesel.

Packaging:

Pachem- Bio-CFI-20 is available in 200 l barrels, in bulk or 1000-litre tanks (IBC). Other types of packaging are available on request.

MSDS CARD: (FOR REGISTERED CLIENTS ONLY)

Attention: Properties and data provided above are for information purposes only. Detailed properties of the product and guaranteed levels of efficiency are given to our clients in Technical Data Sheets.