PACHEM DCFI-1

Cold Flow Improver for Diesel Fuels

General information:

Pachem D-CFI-1 it is an additive for middle distillates which prevents the precipitation of paraffins and at the same it improves fluidity at low temperatures. The additive is cold flow imprower of WAFI type. Due to specially selected components, Pachem D-CFI-1 reduces cold filter plugging point (CFPP) it is temperature at which there can occur interferences in fuel supply into engine in feed systems equipped with filter screen. Pachem D-CFI-1 is liquid with amber colour.

Typical Physical And Chemical Properties:

ParameterUnitValueTest method
Appearance at 20 0C  -  Amber PB-01 - edition 1
Density at 15 0C  kg/m3  880 - 940 PN-EN ISO 12185:2002
Pour Point  0C  ≤ -10 PN-ISO 3016:2005
Flash point  0C  > 23 PN-EN ISO 2719:2007
Viscosity at 40 0C mm2/s   < 15 PN-EN ISO 3104:2004

Application:

Pachem D-CFI-1 is intended to improve such properties of middle distillates as fluidity at low temperatures. The package reduces cold filter plugging point adjusting the properties at low temperatures to application in winter conditions.

Treat Rate:

Typical dosage of Pachem D-CFI-1 is 300-500 ppm weight. The recommended dosage is 400ppm. The final dosage should be adjusted to quality and
composition of base fuel as well as to the expected low-temperature properties.

Packaging:

Pachem D-CFI-1 is available in bulk, 200 l barrels, or 1000-litre tanks (IBC).
Other types of packaging are available on request.

MSDS CARD: (FOR REGISTERED CLIENTS ONLY)

Attention: Properties and data provided above are for information purposes only. Detailed properties of the product and guaranteed levels of efficiency are given to our clients in Technical Data Sheets.